http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata1gk-is-111.jpglink
http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata2gk-is-111.jpglink
http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata3gk-is-111.jpglink
http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata4gk-is-111.jpglink
http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata5gk-is-111.jpglink
http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata6gk-is-111.jpglink
http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata7gk-is-111.jpglink
http://compositesportal.com/modules/mod_image_show_gk4/cache/testata.testata8gk-is-111.jpglink
  • News
  • Articles
  • Events
  • Consulting
  • Pricelist
Prev Next

Two AZL partners are joining forces with AMAC´s support

Two AZL partners are joining forces with AMAC´s support

In April 2015, through the excellence network in composites production technology of the Aachen Center for integrative Lightweight Production (AZL), the two partnering companies Katcon and M.TEC announce their strategic cooperation in order to establish a high-class product portfolio to...

Read more

Qatar has chosen the Rafale

Qatar has chosen the Rafale

Saint-Cloud, France, April 30, 2015 - Dassault Aviation is honored by Qatar’s decision to acquire 24 Rafale aircraft to equip its Air Force. The contract between the State of Qatar and Dassault Aviation is to be signed on Monday, May 4...

Read more

Fokker and NLR join for Composites

Fokker and NLR join for Composites

Fokker and NLR have opened in Marknesse a manufacturing plant for composite aircraft components. The plant will produce composite landing gear components while also developing new manufacturing techniques for high performance composites. Other high-tech companies that develop composites can also...

Read more

Sigmatex awarded Funding for composite vehicles

Sigmatex awarded Funding for composite vehicles

Sigmatex, the world’s leading independent converter of carbon fibre, has been awarded Government Funding through the Advanced Manufacturing Supply Chain Initiative (AMSCI) for a project that aims to produce higher volumes of composites in the UK to accelerate vehicle lightweighting. The...

Read more

Hybrid moulding with Tepex material

Hybrid moulding with Tepex material

LANXESS subsidiary Bond-Laminates GmbH has taken into operation a demonstration cell for processing Tepex continuous-fiber-reinforced thermoplastic composites at the Brilon site. This enables Tepex to be both formed in a fully automated, near-series process and also simultaneously formed and overmolded...

Read more

Formax develops all-carbon infusio fabric

Formax develops all-carbon infusio fabric

Custom carbon fibre fabrics developed by FORMAX enabled Gold Coast Yachts to achieve the challenging weight and engineering specifications for the B53 high-performance racer/cruiser. FORMAX's newly appointed Director of Business Development for North America, Philip Steggall, assisted the boat builder...

Read more

Exelis wins Airbus composite strut contract

Exelis wins Airbus composite strut contract

Exelis has been awarded a multimillion dollar contract from Airbus to produce center wing box struts for the A350-1000 aircraft. This contract marks the second award for the new Exelis STaR (Struts, Tubes and Rods) product line following the A380...

Read more

Exel Composites Signs Cooperation with BMW

Exel Composites Signs Cooperation with BMW

BMW, one of the world’s leading premium manufacturers of automobiles, has selected Exel Composites as a technology partner to develop next generation carbon fiber –reinforced parts for passenger cars.    The world-renowned automobile manufacturer BMW has been investing in the development...

Read more

Class A CFRP parts from Out of Autoclave…

Class A CFRP parts from Out of Autoclave process

On Jan. 14, General Motors Co. (GM, Detroit, Mich.) introduced its 2014 Chevrolet Corvette Stingray reboot at the North American International Auto Show (NAIAS, Detroit, Mich.). Returning to the iconic...

Read more

Design-Optimization of Cylindrical Compo…

Design-Optimization of Cylindrical Composite Structures in Preliminary Design

In this paper a stiffened cylindrical structure for a launcher application is optimized with respect to structural stability, laminate load response and failure analyses. Several types of cylinders (with and...

Read more
No events

Compositesportal staff gathers together experience from all the composite materials industry. Our skilled team can provide consulting for the following areas:

 

  • Design
  • Project Management
  • Cost Analysis
  • Development
  • Quality Assurance
  • Job Rental
  • Training

 

Please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for your request for quotation.

Get the chance to give your job its place in the world with Compositeportal. Choose your favourite ads package from the pricelist below.

 

immagine pricelist

 

News products

09-04-2015
New Airseal DB by Airtech
 New Airseal DB by Airtech

Airseal DB is a vacuum sealant tape for applications at room temperature and up to 150 °C (300 °F). Airseal DB has been designed for ply compaction and debulking operations....

Read more
29-01-2015
XECARB® ST super tough thermoplastics
XECARB® ST super tough thermoplastics

Presented and featured by the initials ST, Xenia aims to add a new line in the field of thermoplastic matrix composites carbon fiber reinforced. ST stands for super tough and guarantees these...

Read more
24-03-2014
Airpad HTX, non silicone rubber
Airpad HTX, non silicone rubber

Airpad HTX is an uncured non-silicone rubber that can be made into caul sheets and flexible mandrels. Airpad HTX has been formulated to provide enhanced performance in comparison to other...

Read more
24-03-2014
Net shape edges with KORDO™
Net shape edges with KORDO™

Composites manufacturing has always been associated with edge trimming and contouring after part curing. This leads to extra costs and needs to work in controlled environment for air filtering. Moreover...

Read more
26-02-2014
LOCTITE EA 934NA AERO
LOCTITE EA 934NA AERO

LOCTITE EA 934NA AERO is a two-component thixotropic paste adhesive, which cures at room temperature and possesses superior strength to 300°F/149°C and higher. Its thixotropic nature and good compressive strength...

Read more
16-12-2013
Tooltec® A005 from Airtech
Tooltec® A005 from Airtech

Tooltec® A005 pressure sensitive tape is designed to adhere to tool surfaces providing semi-permanent release and a reconditioned surface. Tooltec® A005 can be used on all types of moulds, press...

Read more
18-07-2013
Xenia Materials: more strength and tribology
Xenia Materials: more strength and tribology

Xenia Materials is going to take up the technological challenge by increasing resistance and adding tribological characteristics to its compounds.Xenia Materials is an Italian company specialized in the development and...

Read more
24-06-2013
Airtech Vacuum Test Unit
Airtech Vacuum Test Unit

The Airtech Vacuum Test Unit is used to test the vacuum integrity of all Airtech vacuum hoses and valves as well as the quick disconnect couplings attached to these hoses...

Read more
27-04-2013
Quick Vision WLI Series
Quick Vision WLI Series

Mitutoyo Quick Vision WLI Series system combines technique of visual control with the interferometry. The first one is very useful in case of dimensional controls of coordinates, visual inspections in...

Read more
19-04-2013
Net shape edges with KORDO™
Net shape edges with KORDO™

Composites manufacturing has always been associated with edge trimming and contouring after part curing. This leads to extra costs and needs to work in controlled environment for air filtering. Moreover...

Read more